CreteSafe

The Liquid Rubber CreteSafe product line has been designed to provide superior flexible waterproof protection for concrete surfaces. They are environmentally friendly and safe for workers and occupants. They are easy to apply and our most cost-efficient product.

CreteSafe InstaSet B-100

1 Coat application using HVLP2000 sprayer

CreteSafe S-100

Easily applied using a brush or roller

CreteSafe InstaSet B-100

CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
CreteSafe InstaSet B-100
Products designed for below grade or not exposed to UV applications
CreteSafe InstaSet B-100 is a liquid applied waterproof coating that is based on our proprietary bitumen and elastomeric technology. Spray applied in combination with an inorganic rapidset accelerator, CreteSafe B-100 creates an instant-set property that allows applicators to easily build membrane thickness in just one pass. The product then cures into a flexible, rubber-like, waterproof membrane that has excellent adhesion to concrete and most other substrates.

Colour: black

CreteSafe S-100

CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
CreteSafe S-100
Products designed for below grade or not exposed to UV applications
Liquid Rubber CreteSafe S-100 is a single component, easy to apply, waterproofing product that is applied as a liquid and cures to form a seamless, fully adhered, elastomeric membrane conforming to virtually any shaped surface. CreteSafe S-100 contains no solvents, is non-flammable and will not damage polyurethane or polystyrene insulation materials. A variety of geo-textiles can be imbedded into the S-100 to make a strong reinforced waterproofing membrane for heavy-duty applications.

Colour: black

Benefits

1. Seamless waterproof membrane that easily conforms to various shapes, withoutcutting and fitting (as is necessary with sheet products).

2. Durable and long lasting for below grade applications.

3. Superior adhesion to most substrates.

4. Can be applied down to 5C/40F.5. Resistant to salts, acids, and various chemicals.

6. Water based, no solvents, and VOC free.

7. Excellent elongation, recovery, and flexibility for crack bridging and to withstandthermal cycling.

8. No open flame or kettle required.

9. Expensive application equipment is not critical.

Coverage

  • Flat/Ponding Surface

    Apply a minimum final thickness of 1 gallon per 16 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60 mil (1.5mm) (DFT) membrane.

  • Vertical Application

    Apply a minimum final thickness of 1 gallon per 24 sq ft (2.2 sq/m). It should require around 3-4 heavy coats to achieve a 40 mil (1mm) (DFT) membrane.

  • Flat/Ponding Surface

    Apply a minimum final thickness of 1 gallon per 15.5 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60 mil (1.5mm) (DFT) membrane.

  • Vertical Surface

    Apply a minimum final thickness of 1 gallon per 23.25 sq ft (2.1 sq/m). It should require around 3-4 heavy coats to achieve a 40 mil (1mm) (DFT) membrane.

Typical Substrates

  • Larger foundations
  • Concrete Infrastructure
  • Below Grade Tanks
  • Concrete Infrastructure
  • Foundations
  • Any below grade/not exposed to UV application in colder climates

Documents

Foundations General Application Guideline