Tapes and Primers

The Liquid Rubber CreteSafe product line has been designed to provide superior flexible waterproof protection for concrete surfaces. They are environmentally friendly and safe for workers and occupants. They are easy to apply and our most cost-efficient product.

Multi-Purpose Primer

Multi-Purpose Primer
Multi-Purpose Primer
Multi-Purpose Primer
Products designed for Metal Roofs and Metal Substrates

Liquid Rubber Multi-Purpose Primer is a high performance, engineered bonding aid designed to improve the adhesion of Liquid Rubber membranes and minimize moisture vapor drive over a variety of substrates.  Liquid Rubber Multi-Purpose Primer is a single component epoxy composition suitable for easy and safe application to numerous surfaces including concrete, and wood, and cures into a hard, clear film.

EPDM Primer

EPDM Primer
EPDM Primer
EPDM Primer
Products designed for Metal Roofs and Metal Substrates

Liquid Rubber EPDM Primer is the ideal solution for bonding our RV roof Coating to an EPDM surface. Our EPDM Primer is an Acrylic Emulsion Pressure Sensitive Adhesive which is plasticizer migration resistant and has good peel strength and shear resistance. It is used to prime EPDM roofing membranes to provide improved adhesion and prevent moisture vapor drive.

Geo-Textile

Geo-Textile
Geo-Textile
Geo-Textile
Products designed for Metal Roofs and Metal Substrates

Liquid Rubber Geo-Textile is a polyester, reinforcing fabric used to bridge joints, seams, vents, protrusions and more.  It is embedded into Liquid Rubber Coatings, using the 3-course method, where possible movement may occur and reinforces against the tearing and cracking that can result from that movement. Reinforcement in these area's that are prone to movement and leakage is a critical part of any waterproofing installation.

Seam Tape

Seam Tape
Seam Tape
Seam Tape
Products designed for Metal Roofs and Metal Substrates
Liquid Rubber Seam Tape is a peel and stick, pressure applied product designed to accept Liquid Rubber coatings onto its polyester backing. Liquid Rubber Seam Tape makes the surface water-tight prior to the application of your selected Liquid Rubber coating, creating a superior method of waterproofing, crack bridgeing, and reinforcement over conventional 3-course applications and resulting in an incredible finished system.

coverage

  • Multi-Purpose Primer

    Apply at a minimum final thickness 1 gallon per 175 - 200 sq ft (16.26 - 18.58 sq m).

  • EPDM Primer

    Apply at a minimum final thickness of 1 gallons per 250 sq ft (23.23 sq m)

  • Geo-Textile

    4" x 20', 50' and 300' and 40" x 50' and 324' available

  • Seam Tape

    2", 4", and 6" wide x 5', 15' and 50' long rolls available

Typical Substrates

  • Metal
  • Wood
  • Previously Applied Coatings
  • PVC
  • Fibreglass
  • Vinyl
  • As a barrier against Moisture Vapor Drive
  • EPDM RV Roofs
  • Ponds
  • Flat EPDM Roofs
  • Seams
  • Joints
  • Cracks
  • Around Protrusions
  • Corners
  • Rolled Roof Seams
  • EPDM Seams
  • Membrane Tears
  • Metal Roofs
  • Around Protrusions
  • Corners
  • RV Roofs
  • EPDM Pond Liners